Step by Step
Using a different telephone in the same way as your own
66
6666
66
With the display "Enter station no." or "Enter ID", you are
requested to enter the PIN.
Entering the PIN for your own HiPath 40 00 or Hicom
300 E/H system:
E Enter internal PIN.
or Entering the PIN for another HiPath 40 00 or Hicom
300 E/H system area within the integrated network:
E Enter the 2-digit node code for your own HiPath 4000 or
Hicom 300 E/H system (ask with System Support).
EG Enter your own number and press the pound key.
EG Enter the network-wide PIN and press the pound key.
Dialing after (successful) identification:
You hear a dial tone. The following appears on the dis-
play: "Please dial".
Press the key. The lamp goes out.
or
E Enter a number immediately.
Call forwarding - follow me after successful
identification
Select and confirm.
Confirm. Call forwarding has b een activated.
Ente r the code!
Speaker
Variable call forw.?
Save?
To Next Page
Loading...
