EasyManua.ls Logo

Siemens Hicom 300 E - User Advice and Troubleshooting; Telephone Care and Basic Troubleshooting

Siemens Hicom 300 E
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Step by step
Advice for users
96
9696
96
Advice for users
Care of the telephone
Use either a damp cloth or an antistatic cloth to
clean the telephone. Never use a dry cloth!
If the telephone needs to be cleaned thoroughly,
use a neutral, diluted, surface-active cleaning agent.
Ensure that all traces of the cleaning agent are re-
moved with a damp cloth (using water only!).
Never apply a cleaning agent that contains alcohol or
that is liable to harm plastic surfaces; never use an
abrasive cleaning powder.
Troubleshooting
There is no response after a key has been pressed:
Check whether the key has become stuck.
No ringing tone when an incoming call is received:
Check whether you have activated the Do Not Disturb
function (Æ page 21). If you have, cancel this function
to receiv e ca lls aga in.
You cannot dial a number:
Check whether you have locked the telephone
(Æ page 46). If you have, unlock the telephone to make
calls again.
The time shown o n the display is no t corr ect:
After 24 hours at the latest, the time is corrected auto-
matically (overnight).
All other faults :
First contact System Support. If the fault cannot be
eliminated, Customer Service must be called in.

Table of Contents

Related product manuals