Menu Status
12
Handset Settings: Ringer Tone
Navigation: User > Handset Settings > Ringer Tones
Select the ringer melody with which incoming calls are to be signalled on
your handset, and specify the signal volume.
When the handset is supplied, standard ringtones are stored on the
handset. You can also download your own melodies from your PC onto the
handset and use them as the ringtone (see Æ Transfer).
Select ringer tone position
The list shows all ringtones stored on the handset. Select the ringtone
(sound) to be stored for each position (13-16). You cannot change the
ringtones for the positions 1-12.
Alarm
Ringer melody and volume for the handset's alarm clock.
To ne
All the melodies stored in the handset are shown in the list. Select the
melody (sound) that is to be used.
Volume
Select the volume for the ringtone. There is a choice of five volumes in the
list (1= quiet to 5 = loud) and the "crescendo" call (the volume increases
with each ring).
Saving/rejecting settings
Click on the Apply button to store the changed settings on the handset.
Click on the Undo button if you want to reject the changes.
To Next Page
Loading...
Need help?
General