Menu Status
29
Validate Server Certificate (only for EAP Type = TLS)
If you activate the Validate Server Certificate option, the handset checks
the validity of the server certificate received. For this check, the corre-
sponding root certificate must be saved in the handset (see Æ Certificates).
Saving/rejecting changes
Click on the Apply button if you wish to save the settings on this page in
the profile. Click on the Undo button if you want to reject the changes you
have made.
Gatekeeper
Navigation: Admin > Network > Profile Selection > New / Edit >
Gatekeeper
Use this web page to define all settings necessary for the gatekeeper
access.
System Type
Select your communication platform.
Gatekeeper Address
Enter the IP address or DNS name of the Gatekeeper (see Æ Addressing a
server).
Port
Enter the Port number for the communication with the Gatekeeper.
Subscriber Number
Enter the subscriber number for the handset. The number can be between
1 and 20 digits. The subscriber number is the number that is used as the
internal calling number.
Password
By using the „Mobility“ function you can use this password to transfer the
subscriber number including the configuration settings to another
telephone (6 to 32 alphanumeric characters).
Emergency Number
Enter the number that is to be dialled automatically after 1 second (only for
USA).
Location Identifier Number
Number for uniquely identifying a location. In case of e.g. an emergency
this number can be used to identify where the emergency call was initiated.
To Next Page
Loading...
Need help?
General