en Time-setting options
20
Notes
■ Once the appliance has been switched off, the X
field remains lit for a little longer to remind you to
empty the water tank.
■ Remove limescale marks with a cloth soaked in
vinegar, then wipe with clean water and dry with a
soft cloth.
Emptying the water tank
Caution!
Do not dry the water tank in the hot cooking
compartment. This will damage the water tank.
Caution!
Do not clean the water tank in the dishwasher. This will
damage the water tank.
1. Open the control panel.
2. Remove the water tank.
3. Carefully remove the lid of the water tank.
4. Empty and rinse the water tank.
5. Dry all parts with a soft cloth.
6. Place the lid on the water tank and push it down.
7. Insert the water tank and close the control panel.
Starting the Drying function
During drying, the cooking compartment is heated up
so that the moisture in the cooking compartment
evaporates. Then open the appliance door so that the
steam escapes.
1. Leave the appliance to cool down.
2. Remove the worst dirt from the cooking
compartment immediately and wipe away moisture
from the cooking compartment floor.
3. If necessary, press the On/Off button to switch on
the appliance.
4. Press the menu button.
The options for selecting an operating mode are
displayed.
5. Touch the "Next" field.
6. Touch the "Drying" field.
7. Touch the "Next" field.
8. Press the Start/Stop button.
The drying function starts and ends automatically
after 10 minutes.
9. Open the appliance door and leave it open for 1 to 2
minutes so that the moisture in the cooking
compartment can escape.
Drying the cooking compartment by hand
1. Leave the appliance to cool down.
2. Remove any dirt from the cooking compartment.
3. Dry the cooking compartment with a soft cloth.
4. Leave the appliance door open for one hour so that
the cooking compartment dries completely.
OTime-setting options
Time-setting options
Your appliance has different time-setting options.
Notes
■ A cooking time of up to one hour can be set exactly
to the minute.
A cooking time of over one hour can be set in 5-
minute increments.
■ Depending on which direction you turn the rotary
selector, the cooking time starts at a default value:
Anti-clockwise, 10 minutes,
Clockwise, 30 minutes.
■ After a time-setting option has elapsed, a signal
sounds.
■ Using the l button, you can request information
during operation, which then appears briefly in the
display.
Timer
You can set the timer at any time, even if the appliance
is switched off. It runs parallel to the other time settings
and has a separate audible signal. In this way, you can
tell whether it is the timer or a cooking time which has
elapsed.
The maximum setting you can apply is 24 hours.
1. Press the 0 button.
The field for the timer opens.
2. Use the rotary selector to set the timer duration.
The timer starts after a few seconds.
The U symbol for the timer and the time counting down
are displayed on the left in the status bar.
When the time has elapsed
An audible signal sounds. "Timer elapsed" appears in
the display. Use the 0 button to cancel the audible
signal early.
Cancelling the timer duration
Press the 0 button to open the time-setting options
menu and turn the time back. Press the 0button to
close the menu.
Changing the timer duration
Use the 0 button to open the time-setting options menu
and change the timer time in the next few seconds
using the rotary selector. Start the timer with the
0 button.
Time-setting option Use
Q Timer The timer functions like an egg timer. An
audible signal sounds once the set time
has elapsed.
+ Cooking time A signal sounds once a set cooking time
has elapsed. The appliance switches off
automatically.
* End Set a cooking time and an end time. The
appliance switches on automatically so
that the operation ends at the desired
time.
To Next Page
Loading...
