Siemens IM 155-6 PN ST - Product Overview; Module Properties

IM 155-6 PN ST interface module (6ES7155-6AU01-0BN0)
10 Manual, 04/2017, A5E03576904-AE
Product overview
2
2.1 Properties
Article number
6ES7155-6AU01-0BN0 (IM 155-6 PN ST interface module and server module)
6ES7155-6AA01-0BN0 (IM 155-6 PN ST interface module with BusAdapter BA 2×RJ45 and
server module)
View of the module
Figure 2-1 View of the IM 155-6 PN ST interface module and the server module
Properties
The module has the following technical properties:
● Connects the ET 200SP distributed I/O system with PROFINET IO
● Supply voltage 1L+ 24 V DC (SELV/PELV). The connection plug is included in the scope
of delivery of the interface module.
● PROFINET IO connection via selectable BusAdapter for RJ45 bus connector
(BA 2×RJ45) or for direct connection of the bus cable (BA 2×FC)
● Use of fail-safe modules
● As of firmware version V 3.0, you can plug a light-colored or a dark-colored BaseUnit into
slot 1.
The module supports the following functions (Page 13)