Siemens IM 151-7 User Manual

Preface, Contents
Product Overview
1
Getting Started
2
Addressing
3
ET 200S in the PROFIBUS
Network
4
ET 200S in the MPI Network
5
DP Master Module
6
Commissioning and Diagnostics
7
Functions of the IM 151-7 CPU
8
Cycle and Response Times
9
Technical Specifications
10
Changing over from the
IM 151-7 CPU
(6ES7 151-7Ax00-0AB0) to the
IM 151-7 CPU
(6ES7 151-7AA10-0AB0)
11
Position of the IM 151-7 CPU in
the CPU Range
12
Glossary, Index
Edition 11/2003
A5E00058783-04
ET 200S
IM 151-7 CPU Interface Module
Manual
SIMATIC
This manual has the order number:
6ES7151-1AB00-8BA0
The following supplement is part of this documentation:
No. Designation
Drawing number
Edition
1 Product information A5E00385826-02 11/2005

Siemens IM 151-7 Specifications

General

Product type designation	IM 151-7 CPU
Memory (program)	64 KB
Memory (data)	64 KB
Number of Modules Connectable	63
Power Supply	24 V DC
Series	ET 200S
Compatible With	ET 200S
Digital outputs	128
Communication Interfaces	PROFIBUS DP
Data Transfer Rate	Up to 12 Mbps
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	5% to 95% (non-condensing)

Summary

Addressing

Principles of Data Transfer Between the DP Master and the IM 151-7 CPU

3.1 Slot-Oriented Addressing of the I/O Modules

Details the default addressing scheme based on module slot allocation in the IM 151-7 CPU.

3.2 User-oriented addressing of the I/O Modules

Describes how to manually assign addresses to I/O modules independently of slot numbers.

ET 200S in the PROFIBUS Network

4.1 ET 200S in the PROFIBUS network

Describes the structure and basic configuration of a PROFIBUS network with ET 200S nodes.

4.3 PROFIBUS address

Explains how to assign PROFIBUS addresses to nodes for unique identification.

ET 200S in the MPI Network

5.1 ET 200S in the MPI network

Describes the structure and configuration of an MPI network with ET 200S nodes.

5.2 MPI address

Explains how to determine and assign MPI addresses for accessing the IM 151-7 CPU.

DP Master Module

6.1 Mounting the DP master module

Provides step-by-step instructions for physically mounting the DP master module.

6.2 Commissioning the IM 151-7 CPU as a DP master

Details the process of commissioning the IM 151-7 CPU to function as a DP master.

Commissioning and Diagnostics

Configuring the IM 151-7 CPU with STEP 7

Explains how to configure the IM 151-7 CPU for various operating modes using STEP 7.

Resetting the memory of the IM 151-7 CPU

Describes when and how to reset the CPU's memory for troubleshooting or initialization.

7.4 Diagnostics using LEDs

Functions of the IM 151-7 CPU

8.1 Data for the PROFIBUS-DP

Covers device master files (DDB) and important features of the IM 151-7 CPU for PROFIBUS-DP.

8.2 The mode selector and LEDs

8.3 SIMATIC Micro Memory Card

8.4 Memory concept

8.12 Parameters

Cycle and Response Times

9.1 Cycle time

9.2 Response time

Technical Specifications

10.1 Technical specifications of the IM 151-7 CPU

Provides detailed technical specifications including order numbers, features, and general system specs.

Features

Terminal assignment for the IM 151-7 CPU

Changing IM 151-7 CPU (6ES7 151-7Ax00..) to IM 151-7 CPU (6ES7 151-7AA10-0AB0)

The SFC 56, SFC 57 and SFC 13 may work asynchronously

New functionality of the IM 151-7 CPU (6ES7 151-7AA10-0AB0)

Position of the IM 151-7 CPU in the CPU Range

12.1 Differences to selected S7-300 CPUs

12.2 Porting the user program