ET 200S in the PROFIBUS Network
4-7
ET 200S IM 151-7 CPU Interface Module
A5E00058783-04
Example of the use of network components
The figure below shows the example from Figure 4-3 with the use of the network
components. Connecting the bus cable to the bus connector is described in the
Product Information document for the bus connector.
S7-300 (DP master)
ET 200S
PD
PD connecting cable
Bus cable
Bus connector with a PD socket
Connector
Bus cable
Figure 4-5 Connecting the DP network
To Next Page
Loading...
