Siemens IM 151-7 - 7 Th Step: Upgrading the IM 151-7 CPU as an I Slave and Commissioning the S7-300

Getting Started
2-11
ET 200S IM 151-7 CPU Interface Module
A5E00058783-04
2.7 7th step: Upgrading the IM 151-7 CPU as an I slave and
commissioning the S7-300
Se-
quence
Description
1 Remove the connector of the PD cable from the IM 151-7 CPU.
2a Start the Set PD/PC Interface program as described under step 3, point 4. Change the
configuration of the PD/PC interface as follows:
2b
3 Confirm the settings with OK and close the ”Set PD/PC Interface” program.