Siemens IM 155-6 PN ST - Parameters and Address Space; Module Parameters (GSD File); Configuration Control Parameter

IM 155-6 PN ST interface module (6ES7155-6AU01-0BN0)
Manual, 04/2017, A5E03576904-AE
25
Parameters/address space
4
4.1
Parameters
Parameters for IM 155-6 PN ST interface module
The following table shows the parameters for the IM 155-6 PN ST interface module.
Table 4- 1 Parameters for interface module IM 155-6 PN ST (GSD file)
Parameters
Value range
Default
Efficiency range
Configuration control Disable/enable Disable ET 200SP
4.2
Explanation of parameters
4.2.1
Configuration control
You can use this parameter to enable the configuration control function in the ET 200SP
distributed I/O system.
Note
If you configure the enable, the ET
200SP distributed I/O system requires a control data
record 196 from the user program in order for the ET
200SP distributed I/O system to
operate the I/O modules.
Reference
You can find more information in the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual and in the
STEP 7 online help.