Siemens IM 155-6 PN ST - Software Requirements for Configuration

Product overview
2.2 Functions
IM 155-6 PN ST interface module (6ES7155-6AU01-0BN0)
14 Manual, 04/2017, A5E03576904-AE
Requirements
The table below shows the software requirements for a configuration with the
IM 155-6 PN ST interface module:
Table 2- 1 Version dependencies of other module functions
Function
Product version
of the module
as of
Firmware version
of the module as
of
Configuration software
Configuration
with GSD file
(http://support.a
utoma-
tion.siemens.co
m/WW/view/en/
19698639/1300
00)/software
from a third-
party manufac-
turer
1
STEP 7 as of
V5.5 SP3 with
HSP241
STEP 7
(TIA Portal), as
of V11 SP2
Real-time communication
1
V1.0.0
X
X
X
Isochronous real-time com-
munication
1 V1.0.0 X X X
Prioritized startup
1
V1.0.0
X
X
X
Device replacement without
programming device
1 V1.0.0 X X X
Media redundancy (MRP)
1
V1.0.0
X
X
X
Shared device 1 V1.0.0 X X X (as of V13
SP1)
PROFIenergy
1
V1.0.0
---
X
X
Use of fail-safe modules 1 V1.0.1 X X X (as of V13
SP1)
Module-internal Shared In-
put/Shared Output (MSI/MSO)
1 V3.1.0 X X X (as of V13
SP1)
Station extension via ET-
Connection
5 V3.1.0 X X X (as of V13
SP1)
User data 512 bytes 1 V3.1.0 X X X (as of V13
SP1)
Distribution of module chan-
nels to multiple submodules
1 V3.3.0 X X (as of V5.5
SP4, HSP0241
V3)
X (as of V13
SP1, Update 6)
Interface module;
article number: 6ES7155-
6AU01-0BN0
1 V4.1 X X (as of V5.5
SP4, HSP241
V4)
X (as of V14
HSP205)
1
Systems of third-party manufacturers: Depending on the range of functions of the third-party system