Basic settings en
21
3.
Press the
button repeatedly until is highlighted
on the display.
4.
Use the or button to set the time.
a After a few seconds, the appliance starts heating
and the cooking time counts down.
5.
Once the time has elapsed, the display shows the
time as zero. The appliance stops heating up and
responds again as usual outside of Sabbath mode.
‒ Switch off the appliance.
The appliance automatically switches off after ap-
prox.10to 20 minutes.
15 Basic settings
You can configure the basic settings for your appliance to meet your needs.
15.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display Basic setting Selection
Signal duration upon completion of a time or
timer period
= 10 seconds
= 30 seconds
1
= 2 minutes
Waiting time until a setting is applied = 3 seconds
1
= 6 seconds
= 10 seconds
Button tone when pressing a button = off
= on
1
Brightness of the display illumination = dark
= medium
1
= bright
Time display = hide the time
= display the time
1
Childproof lock can be adjusted
→"Childproof lock", Page20
= no
= yes
1
= yes, with locked door
Interior lighting during operation = no
= yes
1
Cooling fan run-on time = short
= medium
1
= long
= extra-long
Telescopic shelves retrofitted
2
= no
1
(for rails and 1-level pull-out)
= yes (for 2- and 3-level pull-out)
Sabbath mode available
→"Sabbath mode", Page20
= no
1
= yes
Water hardness
→"Setting the water hardness", Page22
= softened
= soft (up to 1.5mmol/l)
= medium (1.5–2.5mmol/l)
= hard (2.5–3.8mmol/l)
1
= very hard (above 3.8mmol/l)
Automatic rapid heating from 200°C
2
= no
= yes
1
Reset all values to factory settings = no
1
= yes
.. HomeConnect Settings
→"HomeConnect ", Page22
1
Factory setting (may vary according to model)
2
Depending on the appliance specifications
15.2 Changing basic settings
Requirement:The appliance is switched off.
To Next Page
Loading...
