EasyManua.ls Logo

Siemens iQ500 HR578G5 6B Series - Appliance Door Maintenance; Detaching the Appliance Door

Siemens iQ500 HR578G5 6B Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
en Appliance door
30
2.
Push the retainer
⁠ in between the lower and the
upper bar.
3.
Keep the PUSH tab pushed in ⁠ and swing the pull-
out rail inwards until the front retainer ⁠ is located
between the two bars ⁠.
Release the PUSH tab.
a The retainer ⁠ clicks into place.
4.
Pull the pull-out rail out as far as it will go and slide
it back in.
21  Appliance door
To ensure that your appliance retains its appearance
and remains fully functioning for a long time, you can
detach the appliance door and clean it.
21.1 Detaching the appliance door
WARNING‒Risk of injury!
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
1.
Open the appliance door fully and push in the direc-
tion of the appliance.

Table of Contents

Related product manuals