Siemens LME39.400C2 - Info level; Info Level Navigation and Values

46/73
Building Technologies Division Basic Documentation LME39… CC1P7106en
17 Info level 08.12.2017
17 Info level
17.1 Display of info level
/
reset
1…3 s
Press
/
reset
until InFo appears.
When releasing
/
reset
, you are on the info level.
The info level displays information about the basic unit and operation in general.

Note!
On the info level, you can press or to display the next or the previous
parameter.
In place of the button, you can also press
/
reset
for <1 second.

Note!
You can press
ESC
or
/
reset
for >8 seconds to return to the normal display.

Note!
P
Vh
min s %
Bild 27e/0807
Parameter
Parameter value
Figure 23: Info level
No change of value on the info level.
If the display shows .
_
.
_
together with the
parameter, the value may consist of more than
5 digits.
When pressing
/
reset
for >1 second and
<3 seconds, the value will be displayed.
By pressing
/
reset
for >3 seconds or
ESC
,
you return to the selection of the parameter
number (parameter number flashes).