Need help?Do you have a question about the Siemens LMU54 Series and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Flame supervision | Ionisation, UV |
| Application | Burner control |
| Input Voltage | 24 V AC/DC |
| Operating Temperature | -20...+60 °C |
| Relative Humidity | Up to 95% (non-condensing) |
Detailed description of the LMU's functionalities and capabilities.
Detailed explanation of the burner control program, sequences, and parameters.
How to select compensation variants for heating and DHW circuits based on plant components.
Explains various safety and monitoring functions like temperature and pressure supervision.
Covers boiler control logic, including frost protection and temperature regulation.
Details the control of the PWM heating circuit pump and its stages.
How boiler setpoints are managed for DHW heating with storage tanks.
Explains the compensation variants for DHW temperature control.
Details the operation and control of instantaneous DHW heating systems.
Explains special operational modes and parameterization options for the LMU.
Comprehensive connection diagram for the LMU unit and its terminals.
Electrical and environmental specifications for the LMU unit.
Detailed table of parameters for temperatures, switching differentials, and controller functions.
Explanation of bit fields within various configuration registers.
To Next Page