Siemens MAMMOMAT 1000 - Checks

System Status 2 - 1
Siemens AG Register 8 SPB7-230.101.03 Page 1 of 2 Opdimar
Medical Solutions Rev. 04 07.03 CS PS 24 Maintenance Instructions
2 System Status
2.1 Checks
Check the system status and fill in the Maintenance Protocol.
• Check the serial No. and the part No. for the workstation, the CCD camera and the
biopsy controller.
• Check the licence key (Dicom option).
• For instructions how to check the hostname/hostid see Service Instructions for
Opdima
r , chapter Instruction for obtaining the systems host ID and hostname .
• Document country settings in the Maintenance Protocol.
• If applicable, document network and printer parameters in the Maintenance Protocol.