right page (43) of MC60 Maguro, kurz, am, A31008-H5760-A40-1-4A19 (08.08.2003, 12:31)
Siemens AG 2003, G:\Mobil\L55\MC60_Maguro\am\MC60K_Setup.fm
43Setup
VAR Language: English; VAR issue date: 11-Juni-2003
Keys
§Menu§¢ >¢ Keys ¢ Select
function.
Any to answer
Incoming calls can be accepted by
pressing any key
(except for
).
Auto key lock
If activated, the keypad is locked
automatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
Key tones
You can set the type of acoustic key
tone:
Click or Tone or Still
Phone setup
§Menu§¢ >¢ Phone setup
¢
Select function.
Call waiting b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it (see
also p. 19).
Hide ID b
If activated, your phone number will
not appear on the other party’s
display (depending on tyour service
providers).
Divert
You can specify when calls should be
diverted to your mailbox or other
numbers.
Set up call divert (example):
The most common condition for call
divert is, for example:
Unanswered
b
Select Unanswered.
(Includes the conditions
Not reachable, No reply,
Busy, see below)
§Select§ Press and select Set .
Additional information
The keypad can also be directly locked and
unlocked in idle state.
In each case:
Hold down .