Siemens MC60 - Managing Incoming Calls; Accepting Incoming Calls; Rejecting Incoming Calls; Using the Handsfree Function

©
Siemens AG 2003, G:\Mobil\L55\MC60_Maguro\am\MC60K_Phone.fm
left page (20) of MC60 Maguro, kurz, am, A31008-H5760-A40-1-4A19 (08.08.2003, 12:31)
Calling
20
VAR Language: English; VAR issue date: 11-Juni-2003
Call menu
The following functions are only
available during a call:
y menu§ Open menu.
Babysitter
If this is active, only one number can
be dialled.
Switch on
§Menu§¢ >¢ Security
¢
Babysitter
§Select§ Press.

Enter phone code.
The phone code (4- to 8-digits) is set
by you and entered at the first
security setting.
Please note this code down (see also
p. 16).
§OK§ Confirm input.
§Change§ Press.
/ Select phone number
from Phonebook (p. 25)
or enter new number.
§OK§ Confirm "On".
Apply
To dial, hold down the right of the
control key.
Switch off
Press down.
 Enter phone code.
§OK§ Confirm input.
§Change§ Press.
§OK§ Confirm "Off".
Hold
(S. 31)
Microphone on
If the microphone is
switched off the person
on the other end of the
line cannot hear you
(muting).
Also: Hold
down.
Handsfree
(S. 30)
Volume
Adjust handset volume.
Conference
(S. 31)
Durat/charges
Display call duration and
(if set, p. 29) costs
accruing during the call.
Send DTMF
Enter numbers, e.g., for
remote access to an
automatic answering
machine.
Call
transfer

The original call is joined
to the second one. For
you, both calls are now
ended.
Main menu
Access to main menu.
Call status
List all held and active
calls (e .g. conference
call participants).