Release management - Updating the eP-Satellite server
5.2 Installing the eP-Satellite server software
eP-Satellite server
84 Operating Instructions, 06/2009
Unzip the "Server_Install_Satellite_x.x.x.x.zip" archive. The installation package must be
located no more than one level below the drive letter; otherwise, installation problems
relating to the depth of the directory will arise. It must be ensured that none of the extracted
files including subfolders has read-only access.
Example: C:\temp\server_install_x.x.x.x
You must ensure that the unzipped installation package contains an adapted settings file
(under \tools\install). Following this, you need to run "install satellite_install.cmd".
Enter the following directory paths and confirm the queries as indicated in the table below:
Query Input
Install ePS Trigger Agent YES
Installation path %Installpath%\ePS_Services\Services\Version4
Database for logging %Database\(Instance)%
Create directories YES
Load assemblies to GAC YES
Installing language packages
Unzip Server_install_Ing_yy_x.x.x.x.cab (yy = language code for the relevant language)
Run setup_install_languages.bat under \tools\install\ in each unzipped package.
Installation path %Installpath%\ePS_Services\Services\Version4
Load assemblies to GAC YES
This exact procedure must be followed for all language packages. It is possible to do this for
more than one package at the same time. Once you have completed this process, you
should be able to see folders with each of the relevant language codes in directory
%Installpath%\ePS_Services\Services\Version4\PC\bin.
Installing Genesis V2
In the Genesis directory, run file "genesis_x.x.x.x.msi".
Installation path %Installpath%\ePS_Services\AppServer_V4\Genesis_V2
Logging directory %Logpath%\ePS_Services\AppServer_V4\Genesis_V2\Log_Genensis
To Next Page
Loading...
Need help?
General
