7ML19985DG02 Milltronics MillPulse 600 – INSTRUCTION MANUAL Page 1
Safety Notes
1
Special attention must be paid to warnings and notes highlighted from the rest of the text
by grey boxes.
Safety marking symbols
The Manual
This manual will help you set up your Millpulse 600 for optimum performance. We always
welcome suggestions and comments about manual content, design, and accessibility.
Please direct your comments to techpubs.smpi@siemens.com
.
For other Siemens Milltronics process protection manuals, go to:
www.siemens.com/processprotection
.
1.
This warning symbol is used when there is no corresponding caution symbol on the
product.
WARNING
1
: means that failure to observe the necessary precautions
can result in death, serious injury, and/or considerable material damage
Note:
means important information about the product or that part of the operating
manual.
In manual On product Description
Protective Conductor Terminal
Both direct and alternating current
Notes:
• Please follow the installation and operating procedures for a quick, trouble-free
installation and to ensure the maximum accuracy and reliability of your Millpulse 600.
WARNING: Millpulse 600 is to be used only in the manner outlined in
this manual, otherwise protection provided by the equipment may be
impaired.
To Next Page
Loading...
