To Next PageTo Next Page
Need help?Do you have a question about the Siemens SITRANS F M MAG 1100 and is the answer not in the manual?
General| Product type | Electromagnetic flowmeter |
|---|---|
| Type | SITRANS F M MAG 1100 |
| Process pressure | Up to 16 bar |
| Power supply | 24 V DC |
| Accuracy | ±0.5% of measured value |
| Output signal | 4 to 20 mA |
| Process Connection | Flanged |
| Material | Stainless steel |
| Electrode Material | Stainless steel, Hastelloy, Tantalum |
| Liner Material | PTFE |
| Protection Class | IP67 |
| Process temperature | -20 to +60 °C |
Outlines adherence to relevant national and international safety and technical regulations.
Specifies safety requirements and approvals for installing the device in hazardous locations.
Highlights critical safety measures and hazards to consider during installation.
Specific steps and considerations for installing the MAG 1100 and MAG 1100 HT sensors.
Detailed procedures for mounting the MAG 1100 F sensor with clamp connections.
Explains the importance and methods for achieving electrical potential equalization.
Outlines essential safety requirements for electrical connections and installation.
Provides instructions for connecting a remote-mounted sensor to the transmitter.
Steps to resolve issues related to application setup and measurement accuracy.
Describes tests to verify the sensor's electrical and mechanical integrity.
