Siemens SITRANS F M MAG 1100 - History

Identification
1
7
8
2
3
4
5
6
9
① Product name Sensor product name
② System order no. Device-specific system order number
③ Material Sensor material
④ Cal. Factor Calibration factor
⑤ Fluid group Fluid group statement required by PED
⑥ Lining Liner type Ceramic
⑦ MAWP Maximum allowable working pressures at -20 °C (-4 °F) and 150
°C (302 °F)
⑧ Tmedia Process media temperature
⑨ Year of Manufacture Manufacturing year
Figure 1-1 MAG 1100 identification nameplate example
1
2
① Intrinsical safety data
② Ex approvals Ex approval specifications for the sensor
Figure 1-2 MAG 1100 Ex identification nameplate example
1.3 History
The contents of these instructions are regularly reviewed and corrections are included in
subsequent editions. We welcome all suggestions for improvement.
Introduction
1.3 History
SITRANS F M MAG 1100 sensor
6 Operating Instructions, 01/2018, A5E03433301-AC