Siemens SITRANS F M MAG 1100 - 1 Introduction; Items Supplied; Device Identification

Introduction
1
These instructions contain all the information you need for using the device.
The instructions are aimed at persons mechanically installing the device, connecting it
electrically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
Note
It is the responsibility of the customer that the instructions and directions provided in the
operating instructions are read, understood, and followed by the relevant personnel before
installing the device.
1.1 Items supplied
● SITRANS F M MAG 1100
● Calibration report
● SITRANS F M literature CD
● Quick Start guide
1.2 Device identification
Inspection
1. Check for mechanical damage due to possible improper handling during shipment. All
claims for damage are to be made promptly to the shipper.
2. Make sure the scope of delivery, and the information on the type plate correspond to the
ordering information
SITRANS F M MAG 1100 sensor
Operating Instructions, 01/2018, A5E03433301-AC 5