Siemens SITRANS F M MAG 1100 - Technical Specifications and Data; Process Connection Standards

Technical data
8
8.1 Process connections
Table 8-1 Process connections
Version MAG 1100 MAG 1100 HT MAG 1100 F
Nominal size
- Ceramic
- PFA
- DN 2 to 100 (1/12" to 4")
- DN 10 to 100 (3/8" to 4")
- DN 15 to 100 (½" to 4") - DN 10 to 100 (3/8" to 4")
- DN 10 to 100 (3/8" to 4")
Mating flanges
EN 1092-1 (DIN
2501),
ANSI B 16.5 class
150 and 300 or
equivalent
- DN 2 to 100 (1/12" to 4") (Ce‐
ramic)
- DN 10 to 100 (3/8" to 4") (PFA)
Option:
DN 2 to 10 (1/12" to 3/8"):
G½" / NPT ½" pipe connection
adapters
- DN 15 to 100 (½" to 4")
Weld in
DIN 11850
ISO 2037
(SMS 3008)
Tri-Weld/BS
4825-1
- DN 10 to 100 (3/8" to 4")
- DN 10 to 100 (3/8" to 4")
- DN 10 to 100 (3/8" to 4")
Clamp type
DIN 32676
ISO 2852
(SMS 3016)
Tri-Clamp/BS
4825-3
- DN 10 to 100 (3/8" to 4")
- DN 25 to 100 (1" to 4")
- DN 10 to 100 (3/8" to 4")
Threaded type
DIN 11851
SMS 1145
- DN 10 to 100 (3/8" to 4")
- DN 25 to 65 (1" to 2½")
SITRANS F M MAG 1100 sensor
Operating Instructions, 01/2018, A5E03433301-AC 49