8.4 Design
Table 8-8 Design
Version MAG 1100 MAG 1100 HT MAG 1100 F
Material
● Enclosure
– MAG 1100
Stainless steel AISI 316L
(1.4404)
Stainless steel AISI 316L
(1.4404)
Stainless steel AISI 316L
(1.4404)
● Terminal box
– Standard
– Option
Fibre glass reinforced polyamide
(not for Ex)
Stainless steel AISI 316 (1.4436)
Stainless steel AISI 316 (1.4436)
Fibre glass reinforced polyamide
(not for Ex)
Stainless steel AISI 316 (1.4436)
● Fixing studs
Stainless steel AISI 304 (1.4301),
Number and size to EN
1092-1:2001
Stainless steel AISI 304 (1.4301),
Number and size to EN
1092-1:2001
Stainless steel AISI 304 (1.4301),
Number and size to EN
1092-1:2001
● Gaskets
- Standard
EPDM (max. 150 °C, PN 40
(max. 300 °F, 600 psi))
Graphite (max. 200 °C, PN 40
(max. 390 °F, 600 psi))
For ceramic:
FKM/FPM with stainless steel
insert (AISI 304/1.4301)
(-20 ... +150 °C (-4 ... +302 °F))
EPDM
(-20 ... +150 °C (-4 ... +302 °F))
- Option Graphite (max. 200 °C, PN 40
(max. 390 °F, 600 psi))
PTFE (max. 130 °C, PN 25
(max. 270 °F, 300 psi))
For PFA:
EPDM
(-20 to +150 °C (-4 to +302 °F))
NBR
(-20 to +100 °C (-4 to +212 °F))
● Pipe
connection
adapters:
DN 2, 3, 6 and
10 (1/12",
1/8", ¼" and
3/8")
● Stainless steel
● Hastelloy
● PVDF
8.5 Liner
Table 8-9 Liner
Version MAG 1100 MAG 1100 HT MAG 1100 F
Ceramic DN 2 and 3 (1/12" and 1/8"):
Zirconium oxide (ZrO
2
) (ceramic)
DN 6 to 100 (¼" to 4"):
Aluminum oxide Al
2
O
3
DN 15 to 100 (½" to 4"):
Aluminum oxide Al
2
O
3
Aluminum oxide Al
2
O
3
PFA Reinforced PFA (not for Ex) Reinforced PFA (not for Ex)
Technical data
8.5 Liner
SITRANS F M MAG 1100 sensor
52 Operating Instructions, 01/2018, A5E03433301-AC
To Next Page
Loading...
