Siemens MJ-5 - Page 102

Siemens Industry, Inc. 97
 LTC
Synchronization
Tap Change
Indication
Tap Direction
Indication
Active <Diagnostic>
Menu Items
initial tap position set
at front panel
Op Count (U10)
pulses (“E” to “U” to
“E”)
Monitor current of
“J” and “K”, Motor
relay output, V
 R/L On Time
 R/L Off Time:
 TapChgT/O
 TapInPulse
 PreTapTime
 PostTapTime
 COOP DD
Synchronization
Tap Change
Indication
Tap Direction
Indication
Active <Diagnostic>
Menu Items
Neutral Sense (U12)
closes to E; tap
position may be set at
front panel
Hold Switch (HS)
current pulses (off to
on to off)
Monitor current of
“J” and “K”, Motor
relay output, V
 R/L On Time
 R/L Off Time:
 TapChgT/O
 TapInPulse
 PreTapTime
 PostTapTime
 COOP SD
 LTC.5
Synchronization
Tap Change
Indication
Tap Direction
Indication
Active <Diagnostic>
Menu Items
initial tap position set
at front panel
Op Count (U10)
pulses (“E” to “U” to
“E”)
Monitor current of
“J” and “K”, Motor
relay output, V
 R/L On Time
 R/L Off Time:
 TapChgT/O
 TapInPulse
 PreTapTime
 PostTapTime
Synchronization
Tap Change
Indication
Tap Direction
Indication
Active <Diagnostic>
Menu Items
Cooper Neutral Sense
(U112) closes to U;
tap position may be
set at front panel
Hold Switch (HS)
current pulses (off to
on to off)
Monitor current of
“J” and “K”, Motor
relay output, V
 R/L On Time
 R/L Off Time:
 TapChgT/O
 TapInPulse
 PreTapTime
 PostTapTime