Siemens NCU 710.3 PN - Operator Control and Display Elements; Overview of Operating and Display Elements

Description
3.4 Operator control and display elements
NCU 7x0.3 PN
22 Manual, 09/2011, 6FC5397-1EP40-0BA0
You can see this type plate when you open the front cover of the Control Unit.
Note
The information contained in each field of the type plate on the current control unit may differ
from the information presented in this manual (for example, a later product version,
approvals and marks that have not yet been issued, etc., may be shown).
3.4 Operator control and display elements
3.4.1 Overview of operating and display elements
/('GLVSOD\V
5HVHWEXWWRQ
1&.VWDUWXSVZLWFK
3/
&PRGHVHOHFWRUVZLWFK
VHJPHQWGLVSOD\
'LDJQRVWLFVEXWWRQ',$*
QRIXQFWLRQ
Figure 3-4 Position of operator control and display elements