Software Installation
23
Building Technologies 048_DMS_NK8237_ICC_MP4.40_A6V10316241_a_en.doc
Fire Safety & Security Products 06.2011
6 Software Installation
NK8237 software installation includes the following:
Composer and basic tools for system configuration, included in one of the
DMS8000 product setup
Refer to the MM8000 Installation, Configuration & Commissioning guide
(document no. A6V10062413)
NK8237 add-on, as described in 6.1 below
Additional tools: NW8202 and NW8204, as described in 6.2 and 6.3 below.
6.1 NK8237 Composer Tools
6.1.1 Distribution package
The NK8237 tools are distributed as an add-on package for DMS8000, to be in-
stalled on the engineering station after the standard Composer tool installation.
Installation kit
The installation kit includes (Fig. 17):
The
new Help files, describing the Modbus configuration procedures.
The new Composer Subsystem Tool (New ST) for the Modbus models.
The NK82xx firmware, i.e. an additional DLL module(s) supporting the Modbus
protocol.
The extension name text file; e.g.: MM8000 – Extension Product Name.
Fig. 17 Installation kit
To Next Page
Loading...
