Siemens NK8237 MP4.40 - NK8237 Tools Installation

Software Installation
26
Building Technologies
048_DMS_NK8237_ICC_MP4.40_A6V10316241_a_en.doc
Fire Safety & Security Products 06.2011
 For more information about how to install DMS8000 Composer and configure
the license, refer to the MM8000 ICC guide (Installation, Configuration and
Commissioning, document no. A6V10062413) and to the DMS8000 Network,
Fire and Intrusion Connectivity Guide (document no.A6V10062425).
6.1.4 NK8237 tools installation
A specific application, the Add-on manager, is provided by DMS8000 Composer
and allows installing and updating the add-on modules.
The following describes the installation procedure.
1. Start Add-on Manager.
From the Windows Start menu, select the following:
Start  DMS8000  Tools  Add-on Manager
The Add-on Manager window appears (Fig. 20). The NK8237 tools are not in-
clud
ed in the default add-on list.
2. Click the Browse button, locate the installation files of the add-on module and
select the text file Extension Product Name.txt (Fig. 21).
The NK8
237 tools (FC Modbus GW) appear in the available add-on list (Fig.
22).
Fig. 20 Add-on Manager Window
Fig. 21 Selecting the MM8000 Extension Product Name file