Siemens NK8237 MP4.40 - Menu Send Default Configuration File

Maintenance and diagnostics
64
Building Technologies
048_DMS_NK8237_ICC_MP4.40_A6V10316241_a_en.doc
Fire Safety & Security Products 06.2011
9.3.5 Menu “Send Default Configuration File”
Sends a default configuration file containing only the new IP-configuration to the
NK82xx.
This function allows the download of a default configuration file with new IP pa-
rameter settings to any reachable NK82xx, while NW8202 assumes that the
NK82xx is set to default IP address before downloading the new configuration.
Fig. 41 Send default configuration file
Note: This function is only available when logged in as user admin.