Siemens NK8237 MP4.40 - Page 31

Configuration
31
Building Technologies 048_DMS_NK8237_ICC_MP4.40_A6V10316241_a_en.doc
Fire Safety & Security Products 06.2011
Items needed for configuration

If used, the serial Modbus communication parameters should be defined.
Configuration workflow

If necessary, configure the NK8237 IP address(es) via NW8202
p. 32

In Composer, create the NK8237 project
p. 34

Creating the Modbus system
p. 36

Creating the NK8237 gateway
p. 37

Configure the fire network
p. 40

Customise the Modbus interface
p. 45

Download the configuration to the NK8237 via Composer
p. 49
Testing and commissioning tasks

Test the configuration
p. 53

Troubleshoot and maintain the system using the NW8204 Tool
p. 54