Configuration
35
Building Technologies 048_DMS_NK8237_ICC_MP4.40_A6V10316241_a_en.doc
Fire Safety & Security Products 06.2011
Tip: For a subsequent use, you may want to copy the Empty.bak file in a folder
location more convenient to locate.
5. In the field Project name, enter a suitable name or select an existing project
using the Browse button.
6. Click Restore.
The new project is created in the Project Management.
Fig. 28 Creating a new Composer project from an empty template
Opening the project
To open the NK8237 project, select it and click Open.
The Composer tool opens with an empty project.
The project only includes the main node. By default, the node is named “Project
Node”. You can customise this name by clicking the node and then:
Pressing F2 and typing the new name in the node.
Clicking the node again and typing the new name in the node.
Selecting the Node tab on the right pane and typing the new name in the De-
scription field.
In the project structure, be careful not to add any node that is not included in the
procedures provided in the following procedures. In fact, it may not be allowed to
delete such nodes (e.g. Security).
To Next Page
Loading...
