Safety regulations
6
Building Technologies
048_DMS_NK8237_ICC_MP4.40_A6V10316241_a_en.doc
Fire Safety & Security Products 06.2011
3. In the resulting area on the right, select the document type
(e.g. Contacts, Data Sheet, etc).
For more information such as Siemens news and announcements, visit the STEP
Web portal at:
https://workspace.sbt.siemens.com/
content/00001123/default.aspx
Operational and safety regulations
i
Before beginning work on the system you must have read and understood the
Safety regulations section in this manual.
Liability disclaimer for damage or injuries
Before products are delivered, they are tested to ensure they function correctly
when used properly. Siemens disclaims all liability for damage or injuries caused
by the incorrect application of the instructions, or the disregard of danger adviso-
ries. This disclaimer applies in particular to personal injuries or damage caused by:
Improper and/or incorrect use.
Disregard of safety instructions in the documentation or on the product.
Poor maintenance or a lack of maintenance.
We have checked the contents of this manual for agreement with the hardware and
software described. Since deviations cannot be precluded entirely, we cannot
guarantee full agreement. However, the data in this manual are reviewed regularly
and any necessary corrections are included in subsequent editions. Suggestions
for improvement are welcome.
Copyrights and registered trademarks
Brand or product names mentioned in this document may be names protected by
copyright law or registered trademarks of other companies. These are mentioned
only for identification purposes and have no recommendatory character in regard
to the product or manufacturer, unless otherwise stated.
Modification index
Current version Date Notes
A6V10316241 06.2011 Corresponding with MP4.40
– New NKM8001-A2 mainboard
A6V10316241 12.2010 Corresponding with MP4.30
To Next Page
Loading...
