Siemens OOH740-A9-Ex - Sealing Element FDBZ295

5
Mounting/Installation
Sealing element FDBZ295
50
Building Technologies A6V10367521_h_en_--
Fire Safety 2015-02-02
5.5 Sealing element FDBZ295
Sealing element FDBZ295 is used in conjunction with detector bases
FDB2x1/FDB2x1-AA. The sealing element provides the device with protection
against dirt and spray water.
FDBZ295
2
5
3
FDB2x1
FDB2x1-AA
4
FDOOT241-A9-Ex
OOH740-A9-Ex
8
1
7
6
4 mm
Mounting of sealing element FDBZ295
Mounting
w The kit is installed by hand
1. Fold the sealing lip back.
2. Insert the detector base into the sealing element. Make sure that the opening in
the detector base lines up with the marking and opening on the rubber base.
NOTICE
Risk when piercing the
rubber base with a tool!
Consequences: Leaks in rubber base
●
Do not use tools for piercing!
3. Push the connection wires through the rubber base from the rear.
4. Install the detector base.
5. Insert a point detector into the detector base.