Siemens OOH740-A9-Ex - Detector Locking Device FDBZ293

Mounting/Installation
5
Detector
locking device FDBZ293
51
Building Technologies A6V10367521_h_en_--
Fire Safety 2015-02-02
6. Turn the point detector to the right to screw it firmly into the detector base.
7. Screw the supplied set screw into the point detector or alarm sounder until it no
longer protrudes. This step is not needed when using detector locking device
FDBZ293.
8. Fold the folded-back sealing lip over the point detector.
a The sealing element is installed.
5.6 Detector locking device FDBZ293
The detector can be protected against theft with the detector locking device
FDBZ293.
Mounting of detector locking device FDBZ293
1
Detector base 4 Detector
2 Set screw with a hexagon socket 5 Allen key
3 Hole
1. Place the 'set screw with a hexagon socket' (2) in the hole (3) on the
detector (4).
2. Insert the detector (4) into the detector base (1).
3. Using the Allen key provided (5), insert the 'set screw with a hexagon
socket' (2) through the hole in the detector base (1) and tighten.
a The detector can no longer be removed from the base without tools.