Siemens OOH740-A9-Ex - Connection Terminal DBZ1190-AB

Mounting/Installation
5
Connecting the detector base
55
Building Technologies A6V10367521_h_en_--
Fire Safety 2015-02-02
The detector bases contain a spring clip. Permissible wire/strand cross-section
0.28...1.5 mm².
!
30°
1
3
4
5
6
7
2
Cable entry in detector base
1
The conductor loops must be placed
flat in the base bottom.
5
Contact for test tips
2
The conductor loops must not be
placed over this zone, as otherwise
the detector cannot be inserted
correctly.
6
Turn the screwdriver 90° in the
direction of the arrow to remove the
conductor or insert a strand.
3
Screwless connection terminals
7
Optimum insertion of the wire without
tool, at an angle of approx. 30°
4
Bare length 6.5...7.5
mm
5.10.1 Connection terminal DBZ1190-AB
Use the connection terminal DBZ11900-AB for multiple connections.
DBZ1190-AB
FDB2x1
FDB2x2
2
1
Installing connection terminals in the detector base
1
Connection terminals
2
Detector base