Getting to know your OpenStage phone
21
Programmable sensor keys
Your OpenStage 40 telephone features six programmable lit sensor keys.
Touch the key briefly to activate the programmed function or dial the stored
number Æ page 74.
If you hold the key pressed, you are prompted as to whether to start pro-
gramming this function key.
You can label these keys with internal and external phone numbers or fre-
quently used functions (platform-dependent; please contact the responsi-
ble service personnel).
The configured phone number or function name is displayed next to the
key.
The status of a function is shown by the LED on the corresponding sensor
key.
Meaning of LED displays on function keys
Increase the number of programmable sensor keys by connecting a
key module Æ page 17.
If the prompt is not displayed or a programmed function is not exe-
cuted, then you can only launch key programming via the user menu
Æ page 69 (ask your service personnel about the current setting).
Only for repdial keys can you also program the second level for di-
rect destination selection.
Line and DDS keys can only be programmed by service personnel
via the service menu.
LED Meaning of function key
S
Off The function is deactivated.
T
Flashing
1
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing in-
terval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
Indicates the function status.
R
On The function is activated.
Level 2
Mirea, Ch.
To Next Page
Loading...
Need help?
General