Safety notes in the data sheet
3 |
Legal note
This guide includes notes that must be followed for your own personal safety as
well as to prevent damage to property.
Notes dealing only with damage to property do not have the warning triangle and
use the signal word NOTICE and an exclamation point.
The notes are depicted as follows:
Type and source of hazard
Consequences in the event the hazard occurs
ā Measures/prohibitions to prevent the hazard
Only qualified personnel may commission the device/system. In this regard,
qualified personnel have the training and experience necessary to recognize and
avoid risks when working with this device/system.
The device/system described here may only be used in building technical plants
and for the described applications only.
The trouble-free and safe operation of the device/system described here requires
proper transportation, correct warehousing, mounting, installation, commissioning,
operation, and maintenance.
You must comply with permissible ambient conditions. You must comply with the
information provided in the Section "Technical data" and any notes in the
associated documentation.
Fuses, switches, wiring and grounding must comply with local safety regulations for
electrical installations. Observe all local and currently valid laws and regulations.
The content of this document was reviewed to ensure it matches the hardware and
firmware described herein. Deviations cannot be precluded, however, so that we
cannot guarantee that the document matches in full the actual device/system. The
information provided in this document is reviewed on a regular basis and any
required corrections are added to the next edition.
Safety notes in the data sheet
Comply with all safety notes in data sheet A6V11478118 in the sections
"Technical data" and "Notes".
To Next Page
Loading...
