SD39RIO-1 ACCESSORIES, ATTACHMENTS, AND OPTIONS
January 2001
5-1
5.0 Accessories, Attachments, and Options
5.1 Accessories
Table 5-1 lists the accessories for the Remote I/O Rack.
TABLE 5-1 Remote I/O Rack Accessories
Part Number
Description
16137-60 (single piece) Power Supply Cable. Connects Remote I/O Rack to 24 Vdc power supply.
16056-593
M-BUS/IOBUS Cable Adapter Kit. Converts connector spring latch type
security to screw lock type security (and vice versa)
5.2 Attachments
Table 5-2 lists the attachments that are provided with each Remote I/O Rack.
TABLE 5-2 Remote I/O Rack Attachments
Part Number Description
16056-384
Remote I/O Rack Keying Kit. A bag containing 24 stop plugs to mechanically
interface I/O modules to the Remote I/O Rack. Kit comes attached to the
rack.
14784-9 (single piece) Jumpers W1 to W3 (OK Loop). Factory installed in the backplane assembly.
16066-21 (single piece) IOBUS Shunt Module Assembly (W4). Factory installed in the backplane.
16405-1 (single piece) IOBUS Attenuator Module Assembly. Included with rack.
5.3 Options
Table 5-3 lists the options for the Remote I/O Rack. Consult your system drawings to determine the quantity
and types of optional cables required. The Remote I/O Rack requires a selection of terminated or
unterminated Interconnect I/O Cable Assemblies and a selection of IOBUS A/B cables. If fiber optics are
involved, a Fiber Optic Expander (IFX) and fiber optic cable are required.
To Next Page
Loading...
