Siemens RDE100.1 User Manual

CB1N1423en_01
2013-03-15
Building Technologies
s
1
423
Room thermostat with Auto
Timer, independent DHW
RDE100.1
DH
W
for heating systems
• Room temperature control
• 2-position control with On/Off output for heating
• Comfort, Economy, Auto timer and Protection mode
• Independent On/Auto/Off control of DHW
• Auto time switch
• Adjustable commissioning and control parameters
• Battery-powered DC 3 V (2 x 1.5 V AAA)
Use
The RDE100.1DHW is used to control the room temperature in heating systems
with independent control of DHW.
Typical applications:
• Residential apartments
For the control of the following plant components and of DHW:
• Thermal valves or zone valves
• Gas or oil boilers
• Fans
• Pumps

Siemens RDE100.1 Specifications

General

Type	Room Thermostat
Temperature Range	5 °C to 30 °C
Display	LCD
Protection Class	IP30
Accuracy	±0.5 °C
Power Supply	230 V AC
Output	Relay
Mounting	Wall
Installation	Surface-mounted

Summary

Product Overview

Key Features

Lists core functionalities like room temperature control, 2-position control, modes, DHW control, and battery power.

Functions

Temperature Control

Explains how the thermostat maintains setpoint using a built-in sensor and switching differential of 1K.

Operation and Display

User Interface Overview

Details the operation touchkeys, display symbols, and their meanings.

Mounting and Installation

Mounting Guidelines

Wiring Requirements

Commissioning Procedures

Covers initial reset, parameter settings, sensor calibration, setpoint lock, and touchpad scanning rate.

Operating Notes

Time Switch Configuration

Describes setting individual day, 7-day, or 5-2 day time switches for modes and DHW control.

DHW Control and Timing

Details manual and automatic DHW heating control and timing settings.

Technical Data

Power Supply and Battery Life