Parameter: VT4 Trim Angle
•
Default setting: 0°
The setting value is used (in conjunction with VT1/2/3 Ratio Prim setting) by the device instrumen-
tation e.g. to display primary voltage values.
[lo_7SR5_VTConnections, 1, en_US]
Figure 3-7
Illustration of VT Configuration Settings and VT Connections (Typical)
Device Functionality
3.3 CT and VT Inputs
Reyrolle 7SR5, Transformer Protection Device, Device Manual 63
C53000-G7040-C015-1, Edition 11.2019
To Next Page
Loading...
