Parameter: Reset Hrs In Service
•
Default Setting: <None>
See 3.2 Device Configuration .
Parameter: AFD Zone n Flash
•
Default Setting: <None>
Binary inputs with this setting are intended for use with external arc sensors, they are operated by the
detection of an arc caused by a system short circuit fault, (see 5 Protection and Automation Functions ,
section 50AFD Arc Flash Detection).
Device Functionality
3.4 Binary Inputs
72 Reyrolle 7SR5, Transformer Protection Device, Device Manual
C53000-G7040-C015-1, Edition 11.2019
To Next Page
Loading...
