Siemens Reyrolle 7SR5 - Page 86

Binary Outputs > Output Matrix
Parameter Range Default Setting Setting
Backup Clock Lost
Time Sync. Not Received
Clock Defaulted
BI n Operated
En (n = 1 to 16)
User Output n (n = 1 to
32)
Phase A Trip L4
Phase B Trip L5
Phase C Trip L6
Derived EF <none>
Measured EF
Sensitive EF
Forward PF
Reverse PF
Forward EF
Reverse EF
Forward GS
Reverse GS
EF Out
EF In
GS Out
GS In
Out of Service Mode
Local Mode
Remote Mode
Local or Remote Mode
Device Restart Count
Alarm
Ethernet Life
Ethernet Error
IEC61850 Configured
IEC61850 Time Invalid
Ethernet Ch1 Link Down
Ethernet Ch2 Link Down
Binary Outputs > Binary Outputs Config
Parameter Range Default Setting Setting
Hand Reset Outputs BO 1 to BO n <none>
Min Operate Time n 0 to 2 s, Δ 0.01 s
2 to 20 s, Δ 0.1 s
20 to 60 s, Δ 1 s
0.1 s
Pickup Outputs BO 1 to BO n <none>
Pulsed Outputs BO 1 to BO n <none>
Device Functionality
3.5 Binary Outputs
86 Reyrolle 7SR5, Transformer Protection Device, Device Manual
C53000-G7040-C015-1, Edition 11.2019