Siemens RMH760B - Do You Want to Change the DHW Time Program

18
Building Technologies / HVAC Products CE1B3133x2-en 74 319 0560 0 a 10.10.2006
Do you want to change the DHW time program?
(Only with RMH760B)
Time program of DHW heating
Similar to space heating, the DHW is heated according
to a certain time schedule. The change between normal
and reduced temperature takes place automatically.
You can adopt the factory-set time program, but here too,
individual settings can be made.
The DHW time program can be changed the same way
as the space heating program:
From the DHW time switch submenu, select the weekday,
then the start time of the heating period, and then the
assigned setpoint.
Here too, it is possible to copy a 24-hour program to
other days.
Time program of the circulating pump
The same way – if you wish – you can change the time
program for activating the circulating pump.
Make the entries on submenu Circ pump time switch.
Here too, prerequisite is that your controller controls
DHW heating autonomously. In interconnected plant, the
time program can be preset from an external location.
Path:
Main menu > DHW > DHW time switch
Path:
Main menu > DHW > Circ pump time switch