20
Building Technologies / HVAC Products CE1B3133x2-en 74 319 0560 0 a 10.10.2006
Do you want to enter holiday periods?
You can enter a total of 16 holiday periods and special
days (see next section). During a holiday period, there is
no heating program active but only the same room
operating mode.
Date
On submenus Entry 1, Entry 2, Entry 3 , etc., you need to
enter for each holiday period:
• Menu option Start: Date, year and time of day of the
first day of the holiday period
• Menu option End: Date, year and time of day of the
last day of the holiday period
• Menu option Reason: The holidays
Every entry can be deleted (menu option Cancel entry).
Room operating mode
Enter the required room operating mode with menu
option Holidays-room operating mode. Available are Econ-
omy
or Protection . The entry will apply to all holiday
periods.
DHW heating operating mode
If your controller also controls DHW heating, you need to
enter the required operating mode. You find it with menu
option DHW optg mod holid.
The following operating modes are available:
Automatic, Normal, Reduced, Protection.
Main menu > Heating circuit … > Holidays/special days > Entry …
Main menu > Heating circuit … > Room operating mode > Rm optg mode holid
Main menu > DHW > Holidays/special days > Entry …
Paths for RMH760B:
Main menu > DHW > DHW operating mode > DHW optg mode holid
Main menu > Holidays/special days > Calendar > Entry …
Paths for RMK770:
Main menu > Holidays/special days > Rm optg mode holid … > DHW optm mode holid
To Next Page
Loading...
