32
Building Technologies / HVAC Products CE1B3133x2-en 74 319 0560 0 a 10.10.2006
Main menu primary controller / main controller
(Main controller only with RMH760B)
Menu Plant operation
• Preselection:
On = primary controller / main controller released
Off = primary controller / main controller locked; valve
closes; frost protection is ensured
• State:
On = primary controller / main controller released;
main flow temperature is controlled
Off = primary controller / main controller locked; valve
closes
• Cause:
Here, the reason for the controller’s state is given
Menu Inputs / setpoints
Displayed are the values acquired by the inputs and the
associated setpoints and limit values.
Menu Outputs
Displayed are for each output the state and thus the
operating state (on / off, open / closed) of the controlled
plant component. If a plant component is not present,
there will be no menu item either.
Menu Limitations
The current state of the limitations (Active / Inactive) is
displayed (useful information for the heating engineer).
Path: Main menu > Primary controller
Path: Main menu > Main controller
To Next Page
Loading...
