Siemens S7-1200 - Page 37

6 LCCF_EnetScanner block
EtherNet/IP Scanner
Entry-ID: 109782314, V1.1.0, 04/2021
37
© Siemens AG
2021 All rights reserved
Name
Direction
Data Type
Description
LCCF_typeEnetAdaptConfig.
Refer to the chapter 4.2.1
“Creating an Adapter
description” for details
data
InOut
Array[*] of
LCCF_typeEnetAdaptData
List of data areas for each
configured EtherNet/IP adapter
to exchange data with.
valid
Output
BOOL
TRUE indicates that the values
in the mapping variables are
valid.
FALSE some or all values are
invalid and should NOT be
used for process control.
busy
Output
BOOL
TRUE indicates the CIP Client
block is actively processing
requests.
FALSE indicates the block is
not processing requests.
error
Output
BOOL
TRUE indicates that an error
occurred during the operation
of the block. Depending on the
type of the error indicated by
status (see below) cycling of
the enable flag may clear the
error.
FALSE indicates no error.
isActive
Output
BOOL
TRUE indicates the active data
exchange with all configured
devices
FALSE indicates, that at least
one device is not
communicating with the
Scanner.
status
Output
WORD
Status information about the
operational state of this block.
For details see the chapter
Block status messages below
diagnostics
1
Output
LCCF_typeDiagnostic
A structure containing
additional information in case of
an error, which are relevant for
debugging the CIP server
block. The content is of value
for the developer.
1
The parameter „diagnostics“ may be hidden in the block call.