File type Description Down‐
load
Save Delete
Script CLI script file X -- --
StartupInfo Startup log file -- X --
Users File with user names and passwords X X --
WBMFav File with favorites X X X
WLANAuth‐
log
File with entries from the WLAN Authentication Log
(information on successful or failed authentication
attempts)
-- X --
WLANCert
(in client
mode only)
User certificate. You can specify a password for the
user certificate on the WBM page "Load&Save >
Password".
Maximum file size: 8192 bits
X X X
WLANServ‐
Cert
(in client
mode only)
Server certificate
Maximum file size: 8192 bits
X X X
WLANSi‐
gRec
(in client
mode only)
The zip file contains the following:
● csv file with the measured values of the signal
recorder
● pdf file with the measured values and an
additional graphic representation of the
measured values.
You will find information about the measured values
and their graphic representation in the section "Sig‐
nal recorder".
-- X X
WLANSpec‐
trumAnalyz‐
er
(Only in ac‐
cess point
mode)
The Zip file contains a csv file with the measured
values of the spectrum analyzer.
You will find information about the measured values
and their graphic representation in the section "Spec‐
trum analyzer".
-- X X
Table 4-2 TFTP/SFTP
File type Description Save Down‐
load
Config Start configuration X X
ConfigPack Detailed configuration information. for example, start
configuration, users, certificates, firmware of the de‐
vice (if saved as well).
For more detailed information on creating and using
the ConfigPack incl. firmware, refer to the section
"Maintenance".
X X
CountryList The zip file contains the country list as a csv and as a
pdf file.
X --
Debug This file contains information for Siemens Support. X --
Configuration
4.2 Load and Save
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 83
To Next Page
Loading...
