PROFINET IO Functionality
7.1 Configuring with PROFINET IO
Figure 7-3 Inserting a SCALANCE X208
1. Click on the "(1)SCALANCE" icon so that the slots of the SCALANCE are displayed in the
lower part of the screen. By double-clicking on slot=0, you can set the global parameters
of the SCALANCE (substitute module) as shown in the figure.
2. Click on the slots of the ports and set the specific parameters.
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
Commissioning Manual, 1,
7-3
To Next Page
Loading...
