Accessories
4.5 Manual operators
3VA molded case circuit breakers with UL and IEC certification
262 Manual, 01/2019, L1V30435333-01
The molded case circuit breaker remains in the tripped state until the manual operator is
reset:
1. Clear the fault which has caused the molded case circuit breaker to trip.
2. Turn the manual operator counter-clockwise to the RESET position (just beyond
OFF (O)).
Pull the Max-Flex operator downwards as far as it will go.
The manual operator remains in the OFF (O) position.
Front mounted rotary operator, door mounted rotary operator, side wall mounted rotary
operator:
Handle of the operator kit with Bowden cable:
To Next Page
Loading...
